Home

Part Numbers

For fast and accurcate part numbers and techinical information on specific inserts try out the KATO Product Wizard.

Example of a KATO CoilThread Tool part number:

Example

Tool Type1
(Tangless/Tanged)
Tool Style2 Thread Designation3 Size Designation4 Component / Replacement Part5
Blank for CoilThread (Tanged) KHE - KATO Hex Electric C - Unified Coarse Chart Below G - Nylon Guard (where applicable)
2 - Prefix for CoilThread II Tangless Inserts KPE - KATO Prewinder Electric F - Unified Fine H - Adjusting Sleeve Housing without Nylon Guard (where applicable)
KRE - KATO Round Electric M - Metric M - Mandrel/Mandrel Assembly
  S - Spacer Set (includes 3 spacers + 1 thick shim + 3 thin shims, where applicable)

How to Order - Complete Tool Requires the Following Parts:

  • SBT-50 Power Transformer (CT5407)
  • SB-400C and/or SB-650C Electric Driver
  • Round Shaft Mandrel Assembly (see part numbers)
  • KATO also recommends using the KATO Linear Torque Arm (2KLRM-1)


Round Electric Tool Part Numbers

Thread
Size
Tangless
Round Mandrel
Assembly1
Tangless
Replacement
Mandrel
Tangless
Replacement
Pawl
Tanged
Round Mandrel
Assembly
SBT-50 Power
Transformer3
Electric
Driver
Linear
Torque
Arm
Unified Coarse
2-562KREC-022KREC-02M2KIPC-02KREC-02CT5407CT54052KLRM-1
4-402KREC-042KREC-04M2KIPC-04KREC-04
6-322KREC-062KREC-06M2KIPC-06KREC-06
8-322KREC-22KREC-2M2KIPC-2KREC-2CT5406
10-242KREC-32KREC-3M2KIPC-3KREC-3
12-24---------KREC-1
1/4-20 2KREC-4 2KREC-4M2KIPC-4KREC-4
5/16-182KREC-52KREC-5M2KIPC-5KREC-5
3/8-162KREC-62KREC-6M2KIPC-6KREC-6
Unified Fine2
0-805 2KREF-00 --- --- --- --- --- ---
10-32 2KREF-F3 2KREF-F3M 2KIPF-3 KREF-3 CT5407 CT5406 2KLRM-1
2KREF-L32KREF-L3M
1/4-28 --- --- --- KREF-4
------
Metric Coarse2
M2X.42KREM-F22KREM-F2M2KIPM-2---CT5407CT54052KLRM-1
M2.5X.452KREM-F2.52KREM-F2.5M2KIPM-2.5KREM-2.5
2KREM-L2.52KREM-L2.5M
M3X.52KREM-F32KREM-F3M2KIPM-3KREM-3
2KREM-L32KREM-L3M
M3.5X.6---------KREM-3.5
M4X.72KREM-F42KREM-F4M2KIPM-4KREM-4
2KREM-L42KREM-L4M
M5X.82KREM-F52KREM-F5M2KIPM-5KREM-5CT5406
2KREM-L52KREM-L5M
M6X12KREM-F62KREM-F6M2KIPM-6KREM-6
2KREM-L62KREM-L6M
M8x1.2532KREM-F8---See NotesKREM-8
2KREM-L8---
M10x1.532KREM-F10---See Notes---
2KREM-L10---
M12X1.7532KREM-F12---See Notes---
2KREM-L12---

Notes

  1. The Mandrel Assembly (Tangless only) consists of the installation mandrel (round shaft), installation pawl, spring, pin, wrenches, and adjusting sleeve fully assembled and ready for use. The blue handle is not included, but may be ordered seperately.
  2. Please Note: To use the Tangless Mandrel Assembly for manual installation you must order the optional 2KREH-UI handle.

  3. For improved Tangless installation UNF & Metric thread sizes, use a different installation mandrel for Non-locking & Locking CoilThread inserts; this is indicated by the -F and -L designation in the part number. KATO strongly recommends using Prewinder Electric Tool (KPE) for Fine and Metric thread sizes.
  4. Not compatible with the KATO One Pawl Fits All system at this time.
  5. Use CT5407-EU for European model (240V).
  6. For manual installation only. Comes with 2KREH-UI handle.